Whenever you plug in your laptop, you are normally greeted with a welcome note from the screen, an enthusiastic LED indicator light, and a display that cheers up and beams a little brighter. That is what is expected from it and you don’t feel that you’ll ever seek a laptop repair in Redlands
Often, though, you connect the AC adapter as the battery is almost drained, but you get nothing. Something must be going wrong. The owner of a store for laptop repair in Pomona says that there are several ways to take care of your battery.
Remember, between the wall outlet and your laptop there are multiple steps and parts that all can fail. Few are simple enough to fix in the DIY method with a software tweak or a new battery. However, many other issues may necessitate a laptop repair in Rancho Cucamonga or even a comprehensive system replacement.
By probing you can narrow down faster about the origin of the problem originates and figure out the most viable solution.
So, let's begin our troubleshooting.
Is It Plugged In?
Ensure that the laptop is plugged in. Before doing anything else, check the position of the AC outlet and laptop plugs. Apart from the AC adapter brick, verify that all removable cords are properly inserted. Check whether the battery is perfectly seated in its compartment, and nothing is wrong with either the battery or laptop contact points.
Moreover, check if the problem is even remotely related to the laptop at all. Attempt plugging the power cord into a separate outlet to check whether there’s a short or a blown fuse. In case it's plugged inside a surge protector or power strip, take it out and plug it into the wall.
Is It a Loose Battery?
Initially, the integrity of the battery should be checked. Is your laptop accompanied by a removable battery? Then take it out, and hold the power button down for approximately 20 seconds to drain any static power from the device. With the battery still removed, plug in the power cable and switch on the laptop.
Now, if the laptop properly switches on, it implies that the power adapter is functioning accurately and the issue is probably a substandard battery. It may so happen that the battery was poorly fixed.
Are You Using the Correct USB-C Port?
To connect peripherals, USB-C happens to be a favored cross-platform standard apart from transferring data and charging your battery. The new standard lets thinner devices. However, also might lead to a certain confusion. Few manufacturers have decided to make some USB-C ports data-only, that’s why they can't charge your device.
Few devices, like the Huawei MateBook X Pro, feature two USB-C ports- one for charging or data transfer, and one exclusively for data transfer. In case of a non-charging issue, connect to the appropriate USB-C port. You can notice a little icon on the side to indicate which port is for charging.
Is Your Charger Strong Enough?
Whenever a power adapter adjusts into your laptop's charging port, it doesn’t imply it’s strong enough to charge your laptop. This applies to all types of chargers. However, it’s particularly a common issue with laptops charging over USB-C. You may technically plug in any USB-PD charger, but a few can feature too low a wattage to adequately charge.
Confirm the wattage of the charger provided with your laptop. If it was accompanied by a 45W charger, you’ll possibly wish to stick with a 45W charger or higher for empowering it. A lower-wattage charger could prevent the battery from draining while using it, but won't be sufficient to charge it any higher. Somehow, if it manages to recharge your computer, it'll do it much slower than usual. In the case of a third-party USB-C charger, attempt with one certified by the USB-IF.
Usually, it is better to use the manufacturer’s official, original charger.
Are There Any Breaks, Burnout, and Shorts?
You may bend or flex the power cord. Check if there are any kinks or breaks and the ends for any broken connections, like plugs pulling loose or spots that may have been consumed by a pet or caught in a vacuum cleaner.
Check whether the AC brick is discolored. If you smell something like burnt plastic, that's exactly where the problem lies. Maybe the power connector needs to be replaced.
Have You Checked the Connector?
As you plug inside the laptop's power connector, the connection should be quite solid. In case of any dust or other accumulations inside the jack, it may fail to make a clean connection. Attempt cleaning out the jack with the help of a toothpick, and plugging in again.
Is it Exposed to Heat?
As batteries are vulnerable to heat, they may overheat your laptop leading to a problem. With the rising temperature, the battery sensor can misfire, jeopardizing the system, communicating that the battery is either fully charged or missing leading to charging problems. Often your system may shut down for preventing overheating of a battery and leading to a fire.
Switch the system off, allow some time to cool down, and ensure that the air vents are devoid of dust and unimpeded by blankets.
Inference
If any of the above troubleshooting steps do not work for you, then you might require a laptop repair in South Riverside
No comments:
Post a Comment